Core Tip: Green energy is always the subject of attention, the current method of lighting the world, there are three: the traditional incandescent lamp, energy-saving fluorescent lamps and LED energy-saving lamps. In the market, the traditional incandescent total of 150 million, energy-saving fluorescent 3 billion, LED energy-saving lamps 10 million. Electricity for lighting the entire power consumption of 22% of the world.
What energy-saving LED lighting
LED (LightingEmittingDiode) lighting is LED lighting, is a solid light-emitting semiconductor devices. LED lights green light as a new product, the inevitable trend of future development, will enter the twenty-first century, represented a new type of LED lighting times. LED industry in China started in the 20th century, the age of 70. After 30 years of development, China's LED industry has taken shape in Shanghai, Dalian, Nanchang, Xiamen, Shenzhen, Yangzhou and Shijiazhuang seven National Semiconductor Lighting Project Industrialization Base.
LED lighting products, lighting effects than the same 80% energy saving over traditional light sources, and long life, some people refer to long life lamps, which means the light never goes out. Environmentally friendly LED lighting products, there is no ultraviolet and infrared spectra, neither heat nor radiation, waste recycling, no pollution, typical of the green lighting.
Good prospects for energy-saving lamps LED
Because the light efficiency and cost reasons, LED energy saving lamp is still not flood a large area white lighting and traditional light sources and efficient competition, but in the low-power lighting, partial lighting, security lighting, and so has the advantages of traditional light sources is difficult to compare .
For example street, street lamps illuminate the road mainly to belong to local lighting. Now, being a useful exploration of their business, so that LED energy saving lamps gradually practical.
As for the technical requirements, to ensure that energy-saving LED lights, first of all to a reasonable use LED. In general, do LED energy saving lamps, either use low-power LED, power LED can also be used. However, practice shows that although low-power LED light-emitting devices and low cost advantages, but its light fades faster than high-power LED, and the number of tubes used too much, the assembly of trouble, considering, the choice of high-power LED reasonable.
LED energy saving lamp, compared with the traditional lighting has several advantages, first, small size, LED is basically a very small chip is encapsulated in epoxy resin inside, so it is very small, very light. Second, low power consumption LED's operating voltage is generally 2-3.6V. Operating current is 0.02-0.03A. This means that it consumes power less than 0.1W. Third, long life, at the right current and voltage, LED life of up to 10 million hours. There is environmental protection, LED is made by a non-toxic materials, unlike fluorescent lamps containing mercury can cause pollution, while LED can also be recycled. Another is the high brightness, low heat and durable.
Above, LED energy saving lamps in line with current government policies to promote energy conservation and environmental protection, so it seems, LED energy-saving lamps a bright future, I believe that in the near future, consumers will be accepted into the civilian population at home.
News Categories
