Click picture to enlarge
1: Light ray tube in tube using the most advanced and most reasonable split of the structure, you can always replace the lamp or the ballast, after-sales service and low cost.
2: The Light of the Light Pipe in Pipe Lines with integrated circuits inside the integrated circuit, there are various protection features, including: short circuit, open circuit, lamp abnormalities, tube leakage, high voltage, low voltage, over current, less current. Effective protection can not be burned up lamps and ballasts.
3: Light tube Light tube with integrated circuits, and the relatively high temperature drying in the tube the other end of inductor not only reduces the ballast own temperature and the effective protection of other electronic components of the normal work environment, and the whole ballast more reasonable arrangement of control circuits, which greatly reduces the work of rectifier circuit board space, to a greater extent to increase the length of the lamp's light.
4: Optical Light Pipe in Pipe directly to the national standard T5 lamp standard, widely available on the market to buy, and the price is much cheaper than non-tube, customers need a different color temperature lamp, ready to be according to their requirements need to be replaced.
5: The fire retardant high temperature resistant material ABS plastic parts, can be high temperature 200C degree, the use of more safe and reliable.
6: borosilicate glass tube with 1.67mm (commonly known as: Ex tube) looks more beautiful, light transmission rate of 95% or more.
7: Optical Light Pipe in Pipe T5 fluorescent lamps really three primary colors of light than the efficiency of 88lm/w-95lm/w, higher brightness
Light energy saving lamps fluorescent tubes in the tube divided by the length of the tube pipe 120mm, 90mm tube in tube, 60mm tube, pipe, divided by power: 8W 9W tube tube tube tube tube tube 10W 11W 12W tube tube tube tube 13W 14W tube tube tube tube tube tube 15W 16W 17W tube tube tube tube tube tube 18W 19W 20W tube tube tube tube.
Tube in tube energy saving lamps illumination is either the market or the energy-saving effect a very good lighting, the next two or three years is bound to become mainstream products in the lighting industry!
G90 energy saving lamp tube in tube basic parameters:
Name Type Size Power saving illumination of harmonic voltage and current scope of application of power factor
Pipe in Pipe G90 900mm 13W 60% increase 30% L-level 180V-250V 60mA ≥ 0.95 turn T8 30W
Features: (1) safety: fire, explosion; using ABS plastic materials and fire proof glass
(2) High: T8 lamp contrast rate of up to 60% saving
(3) High brightness: contrast to 30% T8 lamp illumination
(4) Installation is simple, reasonable structure, the lamp can be replaced
(5) long life; product design life of 20,000 hours or more
Energy-saving lamps in Liaoning tube pipe manufacturer
