Click picture to enlarge
Package Type: Single Light
Pixel pitch: 10mm
Pixel density: 10000 dots / sqm
Pixel composition: 1R
Constitute the main driving components: 595,138,245,4953
Cell plate: driver board and LED board is not separated
Unit board size: 320X160mm
Cell board resolution: 32X16 points
A single cell board weight: 0.5KG
Best line of sight display unit board: ≥ 8m
Viewing angle: 140 degrees
The average cell board power consumption: 30 watts
Cell board Maximum Power: 15 watts.
Control method: synchronous / asynchronous
Display driver: 1 / 4 scan
Display frame rate: ≥ 60Hz
Refresh rate: ≥ 360Hz
Mean time between failure (MTBF): 10000 小时
Power supply: DC5V
Display unit board temperature: -10 ~ 45 degrees
Life:> 50,000 hours
Interface Type: General 12 Interface
Interface Description: N = ground (GND), L = latch (LAT or ST), S = clock (Clk), O = enable (OE), E = Enable (/ OE) R = red data, G = Green data, U = blue data, A, B, C, D = line signals, H = decode the signal after the row, F = float, V = VCC)
2 A B C S L R G D 16
1 O N N N N N N N 15
Control card options: matching as needed.
Accessories: power cord connector, jumper cables, a single lamp.
P10 Semi-outdoor color dot matrix module ① 1R
