Click picture to enlarge
Wah Long (VOLUN) LED fluorescent tube (1.2M)
T10/15W (traditional 40W) / 120CM
Specifications:
LED quantity: 276PCS
Input Voltage (AC): AC85-125V
AC165-245V
Output Voltage (DC): DC36-37.6V
Operating frequency: 50 ~ 60HZ
Viewing angle: 120 degrees
Operating temperature: 35 ~ +45 ℃
Storage temperature: -30 ~ +45 ℃
Ambient temperature: -30 ~ +40 ℃
Humidity: ≤ 90%
≤ 120dBuv conducted interference power
Color rendering index: 81Ra
Power consumption: 14.0W-15.0W
Life: 40K-60K hours
Dimensions (with needles): ¢ 30mm, 1200mm
Luminous flux: 1098.8LM
Color temperature :2500-8000K (optional)
Illumination (2M):
Left 1 meter 80LUX
Left 2 meter 46.6LUX
Middle 116.2LUX
Right 1 meter 77LUX
Right 2 meter 45.2LUX
Scope of products:
1, the factory assembly line: LED daylight tube is currently in full compliance with the general production of the national standard (GB50034-92) 100-200 lux illumination (Lux) requirements, no maintenance, compared to traditional fluorescent tubes on the staff of the eyes and body is a kind of protection .
2, supermarket shopping malls (especially the freezer): No infrared, no fever, environmental protection. Color is good, to restore the true colors of goods, goods under the LED light source does not heat.
3, schools, offices: safe and reliable, no flash, soft and pure light, the effective mitigation of visual fatigue and eye protection. No UV, no harm to human skin.
4, hospitals, municipal buildings, squares and parking lots: a long and difficult to maintain lighting places places an absolute bargain.
Usage:
1, LED fluorescent tube and the stent fully supporting the traditional sun, no additional production support.
2, remove the traditional daylight in the rectifier tube (recommended), remove the bracket on the starter (to be), the LED tubes can be on the stand.
Note: LED fluorescent tube fluorescent tube and the use of traditional cost comparison, see the website customer service page!
T10 LED fluorescent tube
