Click picture to enlarge
Product Description:
Our production of LED flash / LED fill light products in the industry, has four major advantages:
1. Using single 1W LED lamp composed of light efficiency is very good;
2.'s Patented thermal management technology to solve the technical difficulties of the largest LED lights;
3. Using a unique constant current source control technology, effective control of light source life;
4, the secondary light distribution of patented technologies to achieve the best light.
Specifically:
1. The United States imports a single chip package semi 1W high power LED as light source, color temperature 2700k-10000k, color white, warm white, sun yellow three. White Flux 95Lm / W.
2. Light metal structure with unipolar, the base can be directly heat, light assembly in the PCB board with aluminum sandwich, and then paste in the thermal conductivity of aluminum silica glass, the large area of thermal material is aluminum fixed aluminum cup, high thermal conductivity, and heat lamp shell larger space, which will help spread the heat conduction.
3. For wide-voltage (AC85V-265V), to overcome the power generated by the ballast, noise pollution and instability caused by lighting, avoid bringing work to the stimulation of eye fatigue. LED lamp life of 50,000 hours, lighting 11-12 hours a day, according to calculations,
LED flash / LED fill light in the next 12 years without replacement.
4. An LED light source with light means the light distribution, which includes the K-factor chip production management, packaging, process control, white balance, and the deployment of optical design, LED Lens, the second with just that by changing the LED Division I light-emitting angles to improve the light utilization factor. Using lenses and reflectors and other accessories to improve the luminous efficiency. The picture shows the light distribution curve of the bat wing, a perfect survey said.
LED flash / LED fill light overview:
High power LED, life of up to 10 years and triple the luminous flux, and fast response time of 100 nanoseconds (1 × 10-7 seconds), for high-speed moving objects, in particular, facilitate the outdoor fill light. Can be applied to electronic police or road fill light camera mount and so on.
LED flash / LED fill light features:
Light source with high power LED, light intensity
Flash penetration, which is suitable under low visibility take pictures
Solution light is good, the flash does not affect the driver's normal driving
Products designed to meet IP65 standards, adapt to the harsh environment
Long design life
LED flash / LED fill light technical parameters:
Power Supply: DC12V
Power supply: DC12V
Power: 12W
Power: 12W
Source: High intensity LED
Lamp-house: High brightness LED
Light color: white
Color: White
Flash time: <10ms
Spark time: <10ms
Trigger Mode: Voltage Trigger (trigger voltage 2.5V ~ 5V)
Triggering mode: Pulse triggering (Impulse voltage +2.5 V ~ +5 V)
Spot: 20 meters
Facula: 20 m
Working environment: -20 ℃ ~ +85 ℃
Environment temperature: -20 ℃ ~ +85 ℃
3w flash
8w flash
9w flash
12w flash
20w flash
Installation instructions:
This product is easy to install, use bracket shell to be placed in its fixed position, the trigger for introduced the two leads connected to the relay normally open contact, relay contacts can withstand 0.8A requires the conduction current, connected power supply to work properly.
▲ Note: The shutter may not exceed 10 ms flash duration, otherwise the damage would be light.
LED flash 3W/8W/9W/12W/16W/20W/40W
