Click picture to enlarge
Gold ball wire bonders - bonding machines
The second point automatic bi-directional welding, automatic bi-directional dual ball bonding, and the three-axis (welding head, displacement, feed) to run simultaneously, greatly improving the wire speed for low power and high power LED in production.
Each bracket 19 welded to the tube, there were audible prompts the timely replacement of brackets and finished the last of a pipe welding, welding head again Do not press, effectively saving the operation time, and let the next bracket of the first tubes have a certain warm-up time;
Wire speed up to 4-6K / H (the speed of automatic machines in general 8-12K / H);
Six operating modes to suit beginners, skilled and solid crystal poor, adversely affect the framework;
Computer-controlled arc formation, arc probably is the bonding of gold the best;
As a result of automatic detection and NC ceramic nozzle is in place to adjust for a check, two check the height of a weld, solder height difference between two large components, too, deal with it smoothly;
Negative electron into a ball (EFO), into a ball the size of precisely adjustable, consistency, and this can be significant savings in gold and raise the chopper life;
Easy to adjust various parameters (ultrasonic power, time, pressure, temperature, burning ball, arc, tail wire, aiming point height, span, etc.) are placed in the panel with a knob;
PID temperature control system used, accurate and stable;
HP120 gold wire bonding machine particularly suitable for large-scale production of light-emitting diodes, and investment costs are significantly lower than the automatic machines, can be described as the performance of automatic bonding machine, manual bonding machine prices.
Power: AC220V ± 10% (50HZ)
Power consumption: maximum 300W
Diameter welded gold: 0.7mil-2.0mil
Ultrasound:
(1) Power :0-5W
(2) time :5-100s ± 5% (10ms / cell)
(3) Frequency: 61KHz ± 1 KHz
(4) Number of channels: 2 channels
(5) Frequency Adjustment: Auto
Pressure:
(1) :25-180g range
(2) Number of channels: 2 channels
Temperature:
(1) control range: room temperature: -400 ℃
(2) Control method: PID system
(3) Display accuracy: Cold <± 2 ℃
Heating time: <± 10 ℃
(4) set the temperature and control the temperature error: <± 5 ℃
Into a ball: ball diameter gold wire diameter of 1.5 to 4 times adjustable, and the ball was not successful with the police.
A review :0-2mm height adjustment range
Arch wire position adjustment range: 0 - initial position
Second review :0-2mm height adjustment range
Automatic welding from welding a span: not less than 6mm
Bench step: 0.1s cycle
Minimum welding time: 0.4s
Lighting: Adjustable brightness
Microscope magnification: Turret Zoom 15,30 times (standard)
Continuous variable 7-60 times (optional)
Step table movement range: 30 × 30mm
Bonding machine - gold wire bonders
