Click picture to enlarge
I. Description:
MIX-715 single liquid automatic quantitative system is mainly composed of three parts: stainless steel pressure tank, a single fluid dispensing valve controller and precision. With manual, semi and auto dispensing function. With a foot switch, the manual function state, according to how long a long; in the semi-automatic mode, click the release, the implementation of the set time of a plastic sealant; automatic cycle mode, the trigger about the foot switch, the executable A plastic time, intermittent time so that repeated cycles. Can adjust the size of the input air pressure to adjust the speed of a plastic; in setting the speed of a plastic case, adjust the glue time to get out of a different glue. Pressure and the regulator device is also limited,
Second, the basic configuration:
1, MIX-126 stainless steel pressure tank, look elegant and refined, the ability of high-strength corrosion, the gum solution directly into the cylinder operation, easy cleaning;
2, MIX-738 precision out of plastic valves, small size, light weight, has a suction function, stop smoking gum at the same time back off instant glue, no drawing, the liquid does not flow backward, disassembly is simple, easy to clean;
3, by regulating the control electrical box on the valve, can be well controlled epoxy flow;
4, with manual, semi-automatic function, depending on the adhesive properties, setting out the glue, the glue time and cycle time;
Third, the main parameters:
Product Type: MIX-715
Operating voltage: AC220V
Continuous working time: 0.01s ~ 99.99s
Minimum volume of the plastic: 0.05ml
Repeatability: ± 0.03
Working speed: 100 times / min
Working pressure: 3 ~ 6 kg /
1 gallon stainless steel pressure tank
MIX-715 single liquid automatic quantitative system is mainly composed of three parts: stainless steel pressure tank, a single fluid dispensing valve controller and precision. With manual, semi and auto dispensing function. With a foot switch, the manual function state, according to how long a long; in the semi-automatic mode, click the release, the implementation of the set time of a plastic sealant; automatic cycle mode, the trigger about the foot switch, the executable A plastic time, intermittent time so that repeated cycles. Can adjust the size of the input air pressure to adjust the speed of a plastic; in setting the speed of a plastic case, adjust the glue time to get out of a different glue. Pressure and the regulator device is also limited,
Second, the basic configuration:
1, MIX-126 stainless steel pressure tank, look elegant and refined, the ability of high-strength corrosion, the gum solution directly into the cylinder operation, easy cleaning;
2, MIX-738 precision out of plastic valves, small size, light weight, has a suction function, stop smoking gum at the same time back off instant glue, no drawing, the liquid does not flow backward, disassembly is simple, easy to clean;
3, by regulating the control electrical box on the valve, can be well controlled epoxy flow;
4, with manual, semi-automatic function, depending on the adhesive properties, setting out the glue, the glue time and cycle time;
Third, the main parameters:
Product Type: MIX-715
Operating voltage: AC220V
Continuous working time: 0.01s ~ 99.99s
Minimum volume of the plastic: 0.05ml
Repeatability: ± 0.03
Working speed: 100 times / min
Working pressure: 3 ~ 6 kg /
1 gallon stainless steel pressure tank
