Click picture to enlarge
JND automatic dispenser
Product Description:
JND-982A automatic dispensing cycle is high-pressure air in the set time, using the foot switch to release the liquid, feature set, J-1000 and 982 type in one. Flexibility to adjust the manual, semi-automatic, automatic state, the use of high-precision digital timing controller, precise control of each titration time, accurate to the millisecond, the right to control the flow of liquid to solid and will not be a waste liquid material. As long as regulate air pressure, time, and select the appropriate needle will easily change the amount of each Note and the dripping drops of time. Epoxy solve many problems, easy to use, quick operation, easy to use, equipped with vacuum suction function, can control the viscosity of different liquids, to prevent the leakage of drops, high efficiency, a plastic consistency. Easy fatigue, no waste, uses a wide range of products is complete, according to user needs, with species of different size syringes and needle is the best partner of the user.
Index parameter:
Power: AC 220V ± 10% / 50Hz
AC 110V ± 10% / 60Hz (can be internal conversion)
Power consumption: <8W
Air Source: Max 0.99MPa (clean dry air without lubrication)
Spit pressure adjustment range: 0.05MPa - 0.99MPa
Function mode: Manual mode / semi-automatic mode (quantitative spit) / automatic mode (one repetition time of quantitative control of spit)
Spit time adjustment: 0.01S-1S; 0.1-10S; 0.2-20S; 0.3-30S
Spit interval adjustment :0.1-20S
Vacuum suction function: adjustable to 600 mm Hg negative pressure control
Repeatability and spit Frequency: Accuracy: 0.01% Frequency:> 800 beats / min
Minimum discharge volume: 0.001ml
Dimensions: 235mmx225mmx63mm
Weight: <2.2kg
Features:
Numeric time table
By 0.18CV constant flow control valve solenoid
Light switch
Adjustable suction device over the town Air 15-inch / mercury (Hg)
Figures show that plastic volume and interval
All kinds of spare parts can be purchased
(A) manual and semi-automatic operation
To switch to automatic auto position (for quantitative, non-timed dispensing)
Adjust the air pressure, the plastic volume, select the appropriate interval of time and can control the needle to the proper flow of liquid material.
No foot switch, the liquid material will be set out in accordance with the amount and time interval between plastic recycling drop out automatically from the needle hole.
To switch to manual position (for non-quantitative, non-timed dispensing)
Adjust the air pressure, the plastic volume and select the appropriate needle.
Step on a liquid material under the foot pedal will drop out from the needle hole, release the foot switch, to stop the glue. The plastic volume and time interval between full manual control.
(B) automatic operation (for quantitative, time dispensing)
To switch to the automatic position.
Adjust the air pressure, the plastic volume, select the appropriate interval of time and can control the needle to the proper flow of liquid material.
No foot switch, the liquid material will be set out in accordance with glue and the intervals automatically drop out from the needle hole.
Apply liquid material:
Then add the oil damping agent anaerobic adhesive epoxy adhesive
Copper flux of organic chemicals silica flux
Conductive silicon rubber adhesive agent grease
Cover agent solder solidification-type paint ink
Tin-pulp fiber solvent paint drops
Applicable products:
Auto Electric household appliances bearing packaging
Pharmacy board camera electronic components
Electrical capacitor production process component processing machines
IC relay quartz crystal jewelry
JND automatic precision dispensing manufacturers sales
