* A component is the appearance of colorless, transparent viscous liquid, B component is a colorless and transparent liquid.
* Speed curing, 25 ℃, 1-3 hours early when the cure full cure 24 hours.
* High bond strength, weather resistance, excellent resistance to UV light.
* Anti-media performance, oil, water, acid, kerosene, ethanol, and radiation.
• Make solar panels to minimize light reflection and increase energy efficiency can improve energy efficiency will light energy into electrical energy.
* Wide range of temperature and temperature adaptation, suitable for outdoor harsh environment installations.
* Adhesive surface does not need strictly, two were in proportion to deploy, easy to use.
• safety and toxicity characteristics: a very slight smell, no inhalation hazard, the actual non-toxic after curing.
* Good storage stability, storage period is 1 year.
The main technical performance indicators are as follows: temperature range: -52 - +100 ℃
Refractive index (nd) 1.60 Water absorption 24h (100 ℃)% <0.1%
Glass transition temperature of 90-100 ℃ linear expansion coefficient cm / cm <5 × 10 ˉ 5
Hardness shore D 85
Adhesive strength (Si / Si): room temperature: Tensile strength ≥ 25MPa; shear strength ≥ 20 Mpa
Use
Method 1, will be casting the object surface decontamination, wipe.
2, A, B component by 3: 2 ratio of the full mix thoroughly.
3, applying the mixed components to be sealed onto the surface of the glue, put it aside for 2 to 4 hours.
Note
Notes 1, Adhesive tool must not be mixed.
2, glue such as contact with skin, wash with soap and water can be timely.
3, the operating environment, attention to ventilation, unused plastic should be covered in a cool ventilated place.
High refractive index transparent epoxy resin