Click picture to enlarge
1. Product specifications summary details
1.1 Specifications
Specifications: Φ50MM
Material: Aluminum + PMMA
Lighting Color: Chrome
Light Source Color: White (color temperature :5500-6500K), warm white (color temperature :2700-3500K)
Light Source: Single 3W
LED Quantity: 1
Weight:: 50g
30 ° beam angle
Life:> 50,000 hours
Insulation voltage: 3000V
1.2 Power Specifications
Input voltage: 85-265V 50-60Hz/AC
Rated Power: 3W
Output voltage: DC3.0-4.0V
Output Current: 700mA
Standard reservation line:
1.3 Environmental Specifications
Operating temperature: -20-40 ℃
Storage temperature: -20 - 80 ℃
Surface temperature :30 - 40 ℃
For humidity :10-90% RH
Protection: Interior Products
1.4 illumination (LUX)
Color
0.5M
1M
1.5M
2M
2.5M
3M
Is white
1250
300
130
72
50
35
Warm white
780
250
110
65
45
25
1.5 Light Output (Lm lumens)
Color
Output
(Lm)
Power
(W)
Luminous efficiency
(Lm / W)
Is white
173
3
58
Warm white
161
3
54
2. Product Features
2.1 LED limit electrical parameters: (Ta = 25 ℃ / led)
Project
Symbol
Ratings
Units
Reverse current
Ir
0.05
mA
Operating temperature
Topr.
-40 ~ 85
℃
Storage temperature
Tstg.
-40 ~ 90
℃
Static breakdown voltage
ESD
2000
V
Limit power
Pd
0.12
W
Forward Current Limit
If (DC)
30
mA
2.2 The specifications of the LED lamp with the brightness and contrast to conventional fluorescent tubes
Features
LED energy saving lamp
Traditional fluorescent tubes
The need for ballast
No
Need
Need starter
No
Need
Is environmentally friendly
Green, RoHS Standards
Do not meet the RoHS standard, mercury
Whether produce ultraviolet
There is no ultraviolet
Will produce ultraviolet
Maintenance
Low maintenance cost, and the lamp can be maintained
The need for regular replacement parts
Life
Long life (≥ 50,000 hours)
Short life (≥ 6500 hours)
Is blinking
No flash frequency
Flicker
Whether there is noise
None (direct power supply case)
There
Energy
Compared with the traditional 50% energy saving fluorescent tubes
3. Application
The products are widely used in large public places, shopping malls, office buildings, corridors and factories. High purity aluminum reflector, anodized surface, reflection efficiency, the entire lamp with aluminum structure, good heat dissipation, high-grade. Use low-voltage output power supply, easy to install, safe, reliable, maintenance-free, low power consumption, long life, under normal circumstances, up to fifty thousand hours or more, green. Through the CCC, CE, UL certification.
4. Note
1: If the lamp is not lit, check the power supply is connected;
2: Do not scrub with a wet towel fixtures:
3: Do not install in damp, leaks, loose parts.
4. To install or remove power before
5. Please use the normal installation
6. If damaged, please look for professionals (or service points) maintenance
5. Shipment inspection standards
5.1 LOT Batch Definition: In principle, the products being manufactured on the same day as a batch (LOT).
5.2 The inspection methods and determination standards
No.
Check items
Standard of acceptance
Inspection norms
1
Appearance
Minor defects AQL 0.65%
Serious defects AQL 0.65%
Fatal flaw c = 0
Common standards with reference to the industry
2
Structure size
(Severe defect)
n = 5 c = 0
Common standards with reference to the industry
3
Optical properties
(Severe defect)
n = 5 c = 0
Common standards with reference to the industry
5.3 rejects deal
Check your company by defective products if found, please notify us as soon as possible in order to review the two sides decided to dispose of the program.
5.4 compensation for defective products
If the causes of defective products due to product manufacturing, the free replacement of the finished product.
5.5 Other
(1) of this specification, if any trouble spots, by mutual agreement after the treatment.
(2) Any alterations must contact and obtain consent before the two sides to change, and change the contents of records management
6. Reliability experimental standard
Project
Test Method
Sub-set
Hot and humid place
60 ℃, 95% RH/240Hrs
After the test shall be placed in normal temperature and humidity conditions were measured after 24 hours:
(1) changes in optical properties within 20%.
(2) changes in the size dimensions range.
(3) visual inspection of products to meet the requirements.
Cold place
-30 ℃ / 240Hrs
Hot place
80 ℃ / 240 Hrs
High temperature and humidity operating
60 ℃, 95% RH / 240 Hrs
High temperature operation
70 ℃ / 240 Hr
Low Temperature Operation
-20 ℃ / 240 Hr
Drop test
Falling objects, weight and height comparison benchmarks:
Weight G ≤ 9kg drop height H = 760mm;
Product weight 9 <G ≤ 22kg Drop height H = 610mm;
Product weight 22 <G ≤ 45.5kg drop height H = 530mm;
Vibration Test
1.5mm amplitude frequency 50Hz, three faces adjacent to 15 minutes per side
Thermal Shock Test
-30 - ℃ → 25 ℃ ← 80 ℃
(30min) ← (5min) → (30min) 100Cycles
7. Product structure
Installation steps:
1, the weld line of the aluminum plate fixed to the heat lamp Cup
2, the holder fixed to the heat lamp Cup
3, the lens fixed to the heat lamp Cup
8. Product physical map
9. Installation diagram
Installation steps:
1, the light source aligned push for position, place holder
2, press and hold the light source to the card bit stuck rotation
10. Shipping packaging
Packaging steps:
1, the paper tray card
2, the light source into the paper tray, paper card live
3, the packaged light source into the carton, each in between the paper cards, filled with sealing
spot light
