Click picture to enlarge
1. Product specifications summary details
1.1 Specifications
Size: 600 * 600 * 15MM
Material: Aluminum + PMMA
Lighting Color: Sand Silver Oxide
Light color: warm white (color temperature :2900-3200K), are white (color temperature :5500-6500K)
Light Source: Single 3528 0.06W
LED Quantity: 600
Weight: about 6.5KG
Beam angle:
Life:> 50,000 hours
Insulation voltage: 3000V
1.2 Power Specifications
Input voltage :85-265V 50-60Hz/AC
Rated Power: 40W
Output Voltage: 48V/DC
Output Current: 0.8A
Standard reservation line:
1.3 Environmental Specifications
Operating temperature: -20-40 ℃
Storage temperature: -20 - 80 ℃
Surface temperature :30 - 40 ℃
For humidity :10-90% RH
Protection: Interior Products
1.4 illumination (LUX)
Color
0.5M
1M
1.5M
2M
2.5M
3M
Is white
2980
1090
530
310
210
172
Warm white
2560
800
440
248
180
138
1.5 Light Output (Lm lumens)
Color
Output
(Lm)
Power
(W)
Luminous efficiency
(Lm / W)
Is white
3787
40
95
Warm white
3223
40
81
2. Product Features
2.1 LED limit electrical parameters: (Ta = 25 ℃ / led)
Project
Symbol
Ratings
Units
Reverse current
Ir
0.05
mA
Operating temperature
Topr.
-40 ~ 85
℃
Storage temperature
Tstg.
-40 ~ 90
℃
Static breakdown voltage
ESD
2000
V
Limit power
Pd
0.12
W
Forward Current Limit
If (DC)
30
mA
2.2 The specifications of the LED lamp with the brightness and contrast to conventional fluorescent tubes
Features
LED energy saving lamp
Traditional fluorescent tubes
The need for ballast
No
Need
Need starter
No
Need
Is environmentally friendly
Green, RoHS Standards
Do not meet the RoHS standard, mercury
Whether produce ultraviolet
There is no ultraviolet
Will produce ultraviolet
Maintenance
Low maintenance cost, and the lamp can be maintained
The need for regular replacement parts
Life
Long life (≥ 50,000 hours)
Short life (≥ 6500 hours)
Is blinking
No flash frequency
Flicker
Whether there is noise
None (direct power supply case)
There
Energy
Compared with the traditional 50% energy saving fluorescent tubes
3. Application
The products are widely used in large public places, shopping malls, office buildings, corridors and factories. High purity aluminum reflector, anodized surface, reflection efficiency, the entire lamp with aluminum structure, good heat dissipation, high-grade. Use low-voltage output power supply, easy to install, safe, reliable, maintenance-free, low power consumption, long life, under normal circumstances, up to fifty thousand hours or more, green. Through the CCC, CE, UL certification.
4. Note
1: If the lamp is not lit, check the power supply is connected;
2: Do not scrub with a wet towel fixtures:
3: Do not install in damp, leaks, loose parts.
4. To install or remove power before
5. Please use the normal installation
6. If damaged, please look for professionals (or service points) maintenance
5. Shipment inspection standards
5.1 LOT Batch Definition: In principle, the products being manufactured on the same day as a batch (LOT).
5.2 The inspection methods and determination standards
No.
Check items
Standard of acceptance
Inspection norms
1
Appearance
Minor defects AQL 0.65%
Serious defects AQL 0.65%
Fatal flaw c = 0
Common standards with reference to the industry
2
Structure size
(Severe defect)
n = 5 c = 0
Common standards with reference to the industry
3
Optical properties
(Severe defect)
n = 5 c = 0
Common standards with reference to the industry
5.3 rejects deal
Check your company by defective products if found, please notify us as soon as possible in order to review the two sides decided to dispose of the program.
5.4 compensation for defective products
If the causes of defective products due to product manufacturing, the free replacement of the finished product.
5.5 Other
(1) of this specification, if any trouble spots, by mutual agreement after the treatment.
(2) Any alterations must contact and obtain consent before the two sides to change, and change the contents of records management
6. Reliability experimental standard
Project
Test Method
Sub-set
Hot and humid place
60 ℃, 95% RH/240Hrs
After the test shall be placed in normal temperature and humidity conditions were measured after 24 hours:
(1) changes in optical properties within 20%.
(2) changes in the size dimensions range.
(3) visual inspection of products to meet the requirements.
Cold place
-30 ℃ / 240Hrs
Hot place
80 ℃ / 240 Hrs
High temperature and humidity operating
60 ℃, 95% RH / 240 Hrs
High temperature operation
70 ℃ / 240 Hr
Low Temperature Operation
-20 ℃ / 240 Hr
Drop test
Falling objects, weight and height comparison benchmarks:
Weight G ≤ 9kg drop height H = 760mm;
Product weight 9 <G ≤ 22kg Drop height H = 610mm;
Product weight 22 <G ≤ 45.5kg drop height H = 530mm;
Vibration Test
1.5mm amplitude frequency 50Hz, three faces adjacent to 15 minutes per side
Thermal Shock Test
-30 - ℃ → 25 ℃ ← 80 ℃
(30min) ← (5min) → (30min) 100Cycles
7. Product structure
Assembly steps:
1, the PCB board light weld will connect four board
2, will play a lead-through of the aluminum and its corresponding two-terminal lock aluminum L-shaped iron
3, the aluminum heat silicone pad slot labeled
4, the light guide, diffuser, reflective film, and aluminum paste together, along the slot into the position of aluminum, the aluminum will be put together without sealing up, lock screws.
5, the long put aluminum trough put four small iron wire, and screwed up
6, the power light on the back of the fixed panel will be connected with the main line input, and blowing a good thermal control
7, the line stretched down rubber joints and lock plate fixed to the ceiling and then down through the extension connector
Connect one end of the main power line terminals
8, ready to install parts package
8. Product physical map
9. Installation diagram
Installation steps:
1, the first hole in the ceiling, into the plastic explosive
2, the self-tapping screws through the siding lock plastic explosive, the hanging plate fixed on the ceiling
3, and then lights on the ceiling of the main power and the power to stay out of phase, L is positive, N for the negative
4, the ceiling panel hanging plate screw holes aligned onto the hanging board, with a fixed peg Banzhu
10. Shipping packaging
Packaging steps:
1, the first use of plastic bags, respectively, Ceiling panel, junction boxes, parts packages, light body wrap
2, the lamp body and the accessory slot into the Styrofoam
3, the paper card cover sealing
LED panel lights, LED Grille
