Long Xian(Personal)

01, very small, light body
LED is very small, very fine chips packaged in transparent epoxy resin inside, so it is pellets, very lightweight, in the production and application can save a lot of materials and space.
02, very low energy consumption
LED's operating voltage to only 2 ~ 3.6V, operating current of just 0.02 ~ 0.03A. In other words: the power it consumes less than 0.1W, the same consumption of electricity than the incandescent light efficiency by 90% or more, less than 70% energy-saving lamps. Therefore, only energy-efficient LED light source can be called true!
03, strong and durable
LED chips are completely encapsulated in epoxy resin inside. Small resin particles is extremely difficult to smashes, the lamp has no loose parts; inside the chip is extremely difficult to break, very few thermal effects which may be volatile, fuse. These features make the LED is difficult to damage. Compared to ordinary light bulbs, fluorescent lamps, LED can be described as impregnable, strong countless times, countless times and durable.
04, long life
At the right current and voltage, LED service life of up to 10 million hours, that in theory, product life of 10 years, longevity is the only star of the field lighting.
05, safety low voltage
Use low-voltage DC power LED (can be AC ​​to DC rectifier), the power supply voltage between 6 ~ 24V, vary by product. In short it is applied more secure than the high-voltage DC power supply, especially for homes and public places.
06, for a wide range of
Because small, small piece of each LED unit is 3 ~ 5mm square or round, so the preparation of molding process is more suitable for complex devices. For example, create soft, flexible lamp, lights, shaped Deng Hua, currently the only LED suitable.
07, richer colors
The former is a single light color, color in order to achieve the purpose of, first, the surface of the light colored paint brush or cover sheet, the second is filled with inert gas in the lamp light, so the rich colors has been limited. LED digital control, LED chip is able to issue a variety of colors, including red, green, blue triple-color, With this triple-color, through the system control, you can restore the colorful worlds.
08, less heat dissipation
Is more advanced LED cold light source, unlike incandescent lamps, fluorescent lamps, as a large number of infrared and ultraviolet radiation, especially for relics, jewelry, luxury cosmetics, lighting and other valuables. Almost no thermal effect of current incandescent that will not be affected by thermal expansion and contraction of the deep-fried bubble. Will not yellow bulbs, lamps will not accelerate the aging of the surrounding environment will not constitute a greenhouse effect.
09, less environmental pollution
LED protection for the environment, mainly in three aspects:
First, there is no metallic mercury hazards. Unlike fluorescent lamps LED lights inside, as the use of high hazards of mercury, the lamp will not be damaged during the manufacturing process or the possible leakage of mercury ions, phosphors and the like public hazard events.
Second, the manufacture of LED's epoxy resin are organic polymers, cured with a good physical and chemical properties, on the chip, metal bonding, high strength, rigid and flexible, stable in alkali and most of the solvent, not easy to damage , even after damage or aging can be recycled, not the pollution on the environment.
Third, LED lamps and displays the particle distribution, are generally produced by scattering of light, little light pollution.
10, the cost-saving
Compared to incandescent, fluorescent, LED lamp purchase price is higher. However, because of particularly low energy consumption LED, in the long run can save a lot of electricity for lights can save the investment, and thus the cost of the integrated use of more cost-effective.