Click picture to enlarge
Product Name: P16 Outdoor full color display
Product Description:
Features
Applicability: all of their products outside the reliability and stability in harsh environments can run.
Rich colors: the three primary colors (red, green, blue) display unit cabinet composed of red, green and blue constitute 16,777,216 256 gray color, making electronic displays showing rich colors, high saturation, high-resolution, high frequency dynamic image display;
High brightness: high brightness LED, solar light is still visible under the long-distance;
Good effect: non-linear correction, the image clearer, stronger sense of hierarchy;
Reliability: The static scan technology and module design, higher reliability and stability;
Diversified display modes: support for multiple display modes;
Easy to operate: The video player software, the system easy to operate.
Scope
Government Plaza, leisure square, large-scale entertainment square, the bustling commercial center, advertising, information dissemination card, commercial street, railway stations and so on.
P16 outdoor full color display parameter table
Categories of conventional parameters parameters
Pixel diameter Φ5 box parameters
16mm pixel pitch
Pixel color component 2R1PG1B
Taiwan ATX chip light-emitting materials
Based pure color 2 Red 1 Green 1 Blue
DIP LED packages
Screen density 3906 dots / ㎡
Cell plate size 1024 × 512mm
Resolution of 64 × 32 cell board
Weight 40KG cell board
The main technical parameters of constant current source driving device
Static constant current drive
Refresh rate ≥ 400 frames / sec
Frame rate ≥ 60 frames / sec
256 gray levels per color gray color constitute 16,777,216
White balance brightness ≥ 6000cd/m2
Adjust the brightness adjustment mode the software adjustable 0-100
Video Signal PAL / NTSC
Video Interface DVI input
Control system uses a DVI graphics card / video processor (send + receive)
Cable transmission distance 100m (without relay), 20km fiber
MTBF ≥ 10000 小时
Life of 100,000 hours
Smoothness between neighboring pixels ≤ 0.5mm, the module splicing gap <1mm
Intensity of the pixels are uniform, the module brightness uniformity
Program control switches the power switch
Computer display mode 1024 × 768
Display the best sight 20m over the entire screen
Level of ≥ 120 degrees viewing angle, ≥ 40 degrees vertical
Storage Temperature 25 ℃ ~ +85 ℃,
Operating temperature 10 ℃ ~ +50 ℃
≤ 95% relative humidity
Panel thickness> 90mm
Supply voltage AC110V / 220V (single or three phase)
300 W/m2 average power consumption
Maximum power ≤ 800 W / m2
Control requires control of the host Pentium Ⅲ processor, 256M memory or more computer
WIN XP/2000/98 Vista operating system
Video synchronization control
Product Description:
Features
Applicability: all of their products outside the reliability and stability in harsh environments can run.
Rich colors: the three primary colors (red, green, blue) display unit cabinet composed of red, green and blue constitute 16,777,216 256 gray color, making electronic displays showing rich colors, high saturation, high-resolution, high frequency dynamic image display;
High brightness: high brightness LED, solar light is still visible under the long-distance;
Good effect: non-linear correction, the image clearer, stronger sense of hierarchy;
Reliability: The static scan technology and module design, higher reliability and stability;
Diversified display modes: support for multiple display modes;
Easy to operate: The video player software, the system easy to operate.
Scope
Government Plaza, leisure square, large-scale entertainment square, the bustling commercial center, advertising, information dissemination card, commercial street, railway stations and so on.
P16 outdoor full color display parameter table
Categories of conventional parameters parameters
Pixel diameter Φ5 box parameters
16mm pixel pitch
Pixel color component 2R1PG1B
Taiwan ATX chip light-emitting materials
Based pure color 2 Red 1 Green 1 Blue
DIP LED packages
Screen density 3906 dots / ㎡
Cell plate size 1024 × 512mm
Resolution of 64 × 32 cell board
Weight 40KG cell board
The main technical parameters of constant current source driving device
Static constant current drive
Refresh rate ≥ 400 frames / sec
Frame rate ≥ 60 frames / sec
256 gray levels per color gray color constitute 16,777,216
White balance brightness ≥ 6000cd/m2
Adjust the brightness adjustment mode the software adjustable 0-100
Video Signal PAL / NTSC
Video Interface DVI input
Control system uses a DVI graphics card / video processor (send + receive)
Cable transmission distance 100m (without relay), 20km fiber
MTBF ≥ 10000 小时
Life of 100,000 hours
Smoothness between neighboring pixels ≤ 0.5mm, the module splicing gap <1mm
Intensity of the pixels are uniform, the module brightness uniformity
Program control switches the power switch
Computer display mode 1024 × 768
Display the best sight 20m over the entire screen
Level of ≥ 120 degrees viewing angle, ≥ 40 degrees vertical
Storage Temperature 25 ℃ ~ +85 ℃,
Operating temperature 10 ℃ ~ +50 ℃
≤ 95% relative humidity
Panel thickness> 90mm
Supply voltage AC110V / 220V (single or three phase)
300 W/m2 average power consumption
Maximum power ≤ 800 W / m2
Control requires control of the host Pentium Ⅲ processor, 256M memory or more computer
WIN XP/2000/98 Vista operating system
Video synchronization control
